During the use of plating line, some problems often arise. This article focuses on introducing several common faults for you, let’s have a look at !1. Pitting. Pitting is caused by dirty workpieces and plating solution. The characteristic is convexity, no shiny phenomenon, and no fixed shape....
The characteristics of the fully automatic Vertical lift plating production line:1. The plating production line of VTOL is a double chain Caterpillar driven elevator to the plating process plating line for replacement and circulation, which is flexible in operation, low in noise and wide in appl...
Install the small parts that have undergone pre plating treatment into the roller, and the parts rely on their own gravity to tightly press the cathode conductive device inside the roller to ensure the smooth transmission of the required current when the parts are plated. Then, the roller rotate...
1. The thickness is generally 20 μm Above m, the hardness is generally 800-900HV.2. Hard chrome plating; Hard chrome plating process. It is to deposit a thick layer of chrome coating on various substrate surfaces, utilizing the characteristics of chrome to improve the hardness, wear resistance, ...
Total 4 , Pages 1
